스파크점화 기관에서 고속응답 FID를 이용한 실린더내 잔류가스량 측정에 관한 연구
송해박, 조한승, 이종화 et al. · 한국자동차공학회논문집 · 1998
The residual gas in an spark-ignition engine is one of important factors on emissions and persuch as combustion stability. With high residual gas fractions, flame speed and maxicombustion temperature are decreased and these are deeply related with combustion stability especially at idle and NOx emission at relatively high engine load. Therefore, there is a need to characterize the residual gas fraction as a function of the engine operating parameters. In the present study, the quantitative measurement technique of residual gas fraction was studby using Fast Response Flame Ionization Detector(FRFID). The measuring technique and model for estimation of residual gas fraction were reported in this paper. By the assuming that the raw signal from FRFID saturates with the same slope for firing and misfiring cycle, in-cylinder hydrocarbon(HC) concentration can be estimated. Residual gas fraction can be obtained from the in-cylinder HC concentration measured at firing and motoring condition. The developed measureand calibration procedure were applied to the limited engine operating and design condition such as intake manifold pressure and valve overlap. The results show relevant trends by comparthose from previous studies.
Cited by 0 works.