심해저 망간단괴 파일럿집광로봇 유압시스템

최종수, 여태경, 김형우 et al. · 한국해양환경·에너지학회 학술대회논문집 · 2012

A pilot mining robot far deep-sea manganese nodules, which aims at the use for Pre-Pilot Mining Test and Pilot Mining Test, was designed and was being manufactured. The scale of the pilot mining robot is 1/5 for commercial one. In this paper, hydraulic system of the pilot mining robot, which has just been constructed, is introduced and explained. Hydraulic system is composed of reservoir, high pressure filters, valve packs, linear and rotational actuators, return and drain filters, and so on. Since the hydraulic system is determined as a dosed loop hydraulic circuits, reservoir pressure within the circuits is compensated to ambient The pressure of reservoir always keeps about 0.25~0.5 bar the higher than ambient pressure. Since the pilot mining robot works about ambient temperature, 2 ℃, and is moving system, the small size reservoir was adopted for reducing total weight and space. The capacity cf a compensator was calculated by considering the bulk modulus of the hydraulic oil. HPLIs were tested successfully in factory at full flaw, highest pressure, half loading. The bad-compensated proportional valves for the speed control of some actuators were adopted in order to make the actuators rotating constantly for varied loading. The pilot mining robot including the hydraulic system will be tested at 1000m water depth of East Sea in the end of 2012. The performance of the system mill be verified and the data for designing commercial mining system will be collected.

Cited by 0 works.

Authors