ITER Dynamic Tritium Inventory Modeling Code
Ioana-R. Cristescu, Lothar Dörr, Anthony Busigin et al. · Fusion Science & Technology · 2005
A tool for tritium inventory evaluation within each sub-system of the Fuel Cycle of ITER is vital, with respect to both the process of licensing ITER and also for operation. It is very likely that measurements of total tritium inventories may not be possible for all sub-systems, however tritium accounting may be achieved by modeling its hold-up within each sub-system and by validating these models in real-time against the monitored flows and tritium streams between the systems. To get reliable results, an accurate dynamic modeling of the tritium content in each sub-system is necessary. In order to optimize the configuration and operation of the ITER fuel cycle, a dynamic fuel cycle model was developed progressively in the decade up to 2000-2001. As the design for some sub-systems from the fuel cycle (i.e. Vacuum pumping, Neutral Beam Injectors (NBI)) have substantially progressed meanwhile, a new code developed under a different platform to incorporate these modifications has been developed. The new code is taking over the models and algorithms for some subsystems, such as Isotope Separation System (ISS); where simplified models have been previously considered, more detailed have been introduced, as for the Water Detritiation System (WDS). To reflect all these changes, the new code developed inside EU participating team was nominated TRIMO (Tritium Inventory Modeling), to emphasize the use of the code on assessing the tritium inventory within ITER.
Cited by 20 works. doi:10.13182/fst05-a939
Authors
References
- Plasma-material interactions in current tokamaks and their implications for next step fusion reactors
- CFTSIM-ITER dynamic fuel cycle model
- Recovery of tritium from different sources by the ITER Tokamak exhaust processing system
- Steady State and Dynamic Simulation of the ITER Hydrogen Isotope Separation System
- Tritium Inventories in the High Vacuum Pumps of ITER
- Dynamic Simulation of a Proposed ITER Tritium Processing System
- Development of a Fusion Fuel Cycle Systems Code