천음속 원심압축기 내부 유동해석
성선모, 강신형, 최재호 et al. · 유체기계 연구개발 발표회 논문집 · 2008
A computational study was carried out to simulate the flow fields within a transonic centrifugal compressor and focused on the variations in the tip leakage flow structure at three operating conditions- near choke, design point and peak pressure rise. The tip leakage flow shows very complex structures composed of the impingement on the pressure surface of the adjacent splitter blade, the spillage ahead of the adjacent splitter blade and strong radially upward flow near the suction surface. The tip leakage flow mixes with the incoming flow and there is a high entropy gradient in the interface between these two flows. As mass flow rate decreased, the interface becomes more tangential and the position of the minimum pressure moves upstream. Therefore, the peak of the tip leakage velocity appears near the leading edge at low mass flow rate. The profile of the tip leakage velocity shows the core with approximately constant slope at 20~80% height of the distance from the blade tip to the casing.
Cited by 0 works.