흙댐 제체의 보강재 설치에 따른 월류붕괴 지연효과
주요한, 여창건, 이승오 · 대한토목학회논문집 · 2013
Most embankment of the reservoirs (99.1%) have been constructed in the earth filled type in Korea because the construction of this type is less expensive and simpler than others such as concrete one. However, it has to be reinforced the slope to prevent the breach due to overtopping or piping under unexpected flood conditions. This study has been analyzed the retardation effect using three types(L, T, L * shape) of stiffener in order to reinforce embankment when they are collapsed by overtopping flow. Experimental results showed that L-type stiffener is the most effective in delaying the breaching of embankment and reducing the soil erosion when compared with others. The reinforced embankment breaching showed that time delay was occurred about 1.73 to 2.29 times and the peak flowrate was reduced compared to non-stiffener embankments due to energy dissipation by collision and less soil erosion. The embankment breaching mostly leads to major damages because of tile lack of repair time. Thus, since these stiffeners can resist the rapid breach, it would be possible to earn tile time to emergency repair and lifesaving, as well as reduction of damages of embankment in downward region with decreasing peak flowrate. Results from this study would be used for the basis when establishing the emergency action plan for the reservoirs on tile verge of hazard.
Cited by 0 works.
Authors
References
- Embankment Dam Breach Parameters and Their Uncertainties
- Sensitivity of outflow peaks and flood stages to the selection of dam breach parameters and simulation models
- FLOW PATTERNS AND DAMAGE OF DIKE OVERTOPPING
- Breach Morphology Observations of Embankment Overtopping Tests
- 부분 유공케이슨의 Slit 형상에 따른 반사특성 실험
- Trichloroethylene (TCE) Removal Capacity of Synthesized Calcium Sulfoaluminate Minerals in Hydrated Cement-based Materials
- Behavior of failure of agricultural reservoir embankment due to overtopping
- An Experimental Study on the Collapse Phase of a River Leeve(I) -Effects of the Geometric Characteristics of Cross Section