직분식 디젤엔진용 고압 인젝타 구조에 관한 연구
김명곤, 장기원, 김창수 · 한국자동차공학회 춘 추계 학술대회 논문집 · 1997
In the study we've got the conclusions as follows by analyzing the stress of high pressure weak parts of injector in diesel engine. In the existing the body of nozzle, we've already got the reliable data to 1000 bar, but it's the limit. To obtain the proper shape data in the high pressure up to 1500 bar, we have increased the thickness(t). So we obtain the proper data that if thickness(t) is over 1.1mm, enough to 1500 bar except the effect of heat stress, shock wave ,and impact force, etc. And, by rounding the weak point of B and C with R=0.3mm, it could be decreased the stress of 25 percent and also could be used enough to 1500 bar with t= 1.1mm. In the body of nozzle holder of KBAL-P type being used in small D.I diesel engine, it is the limit to 1000 bar with only existing shape. But in the case that the thickness(t) between spring room and oil supply hole is over 1.0mm, we can obtain the reliable thickness data to 1500 bar. And at the time of designing the high pressure type of nozzle holder, we think that the eccentric spring room must be adopted.
Cited by 0 works.