미세입자가 침투한 시일과 스틸면 사이의 접촉해석
조현동, 정현기, 박태조 · 대한기계학회 춘추학술대회 · 2009
In many dynamic seals such as lip seal and compression packings, it is well known that wear occur at the surface of heat treated steel shaft as results of the intervened wear or foreign particle. It is widely understood that the dominant wear mechanism related in sealing surfaces is abrasive wear. However, very little studies about this problems have been done until now. In this paper, a contact analysis is carried out using MARC to investigate the wear mechanism in dynamic seal applications considering elastomeric seal, a elastic perfect-plastic micro particle and steel surface. Deformed seal and steel surface shapes, von-Mises · residual stresses distributions for various interference are showed. The maximum von-Mises stress within steel shaft was exceeded its yield strength and plastic deformation occurred at steel surface. Therefore, the sealing surface can be also worn by sub-surface fatigue due to micro particles together with well known abrasion. The numerical methods and models used in this paper can be applied in design of dynamic sealing systems, and further intensive studies are required.
Cited by 0 works.