일축압축 한계변형률에 의한 암반터널 변위기준 적용성 평가

김영수, 김대만 · 대한토목학회논문집 C · 2009

Laboratory compressive test was conducted on 6 different types of rock in order to investigate the characteristic of critical strain under uniaxial and triaxial stress condition. The results of uniaxial compressive test mostly ranged within 1~100㎫, the critical strain was also located between 0.1~1.0%. Therefore the results distributed within the upper and lower boundary proposed by Sakurai (1982). And the failure/critical strain ratio (e ? /e 0 ) showed between 1.0~1.8 value depending on the uniaxial compressive strength. The results of critical strain by triaxial compressive test showed below 0.8% value for all test, the M value calculated from uniaxial and triaxial compressive test results ranged 1.0~8.0 for most of rock specimens. It is concluded that failure strain (e ?3 ) of rock mass, which is in triaxial stress condition is larger than the results of uniaxial stress condition (e ?1 ) by 1.0~8.0 times and value showed 1.0~1.8 larger value than critical strain (e 01 ). Therefore it is a conservative way for rock tunnel to use critical strain (e 01 ) calculated from a uniaxial compressive strength on tunnel displacement monitoring.

Cited by 0 works.

Authors