라디칼 유도분사에 의한 예혼합기의 연소특성

최하성, 박종상, 하종률 et al. · 한국자동차공학회 지회 학술대회 논문집 · 2002

An experimental study was carried out to obtain a series of fundamental data about radical controlled and induced injection effect on the combustion of pre-mixture in the main-chamber. The volume of the sub-chamber is set up to occupy less than 1.5% of whole combustion chamber, the equivalence ratio of pre-mixture in the main chamber and sub-chamber is uniform, and numerous narrow passage holes are arranged to induce simultaneous multi-point ignition in the main chamber by flame jets including radicals from the sub-chamber. In the case of radical ignition method(RI), the overall burning time including the ignition delay time became very short compared with that of the spark ignition method(SI). With the increase of the diameter of passage holes and the volume of the sub-chamber, the combustion characteristics of the Rl becomes similar to that of the Sl. By the result of the visualization of combustion in the main chamber, while the Sl shows the traditional flame propagation, the RI shows the phenomena as bulk combustion.

Cited by 0 works.

Authors