압전식 에너지 수확기의 주파수 특성
윤소남, 김동건, 함영복 et al. · 대한기계학회 춘추학술대회 · 2008
This paper presents an energy harvester using piezoelectric elements that is a kind of generator which converts the mechanical power to the electric one using windmill system with many PZT actuators. In this study, low frequency characteristics of the cantilever-type piezoelectric actuator are experimentally investigated. Advantages of the cantilever use are to take a very large displacement and to improve the endurance of the PZT element. The material of cantilever is an aluminum and three kinds of cantilever of which size is 150[㎜]×20[㎜]×1.5[㎜], 170[㎜]×20[㎜]×1.5[㎜] and 190[㎜]×20 [㎜]×1.5[㎜] were experimented, respectively. The cantilever was fixed on the vibrator. The characteristics of frequency and mass variation of cantilever end part such as 0[g], 5[g], 10[g] are investigated. Maximum voltage was outputted at the condition of 150[㎜]×20[㎜]×1.5[㎜] and 10[g] of mass. It was confirmed that the lower natural frequency at the larger length of cantilever and at the bigger of mass is gotten.
Cited by 0 works.