Presizing Methodology of DC–DC Converters Using Optimization Under Multiphysic Constraints: Application to a Buck Converter
Kamal Ejjabraoui, Chérif Larouci, Pierre Lefranc et al. · IEEE Transactions on Industrial Electronics · 2011
This paper presents an approach to presize dc-dc converters. This approach is carried out in three main steps. The first one helps the designer to select the most adapted architecture answering the specifications and appropriate technologies of passive and active components of the selected architecture minimizing a major constraint (like volume or cost). Models used in this step are developed from manufacturer datasheets. The second step consists on optimizing the selected architecture by considering the appropriate technologies resulting from the first step under multiphysic constraints: thermal, losses (or efficiency), volume, and electromagnetic compatibility. Analytical models to consider the different constraints are developed. The third step carries out a second optimization with integration of a finite element simulation. It allows refining the optimization results of the second step and consists on optimizing the components placement under thermal and EMC constraints together or separately. The developed methodology proposes a progressive approach to answer industrial needs when presizing power converters. It allows reducing significantly the computing time which is suitable in a presizing phase where several parameters must be optimized and multiphysic constraints must be respected.
Cited by 31 works. doi:10.1109/tie.2011.2162210
Authors
References
- Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles
- Energy Storage Systems for Automotive Applications
- A Hybrid of Genetic Algorithm and Particle Swarm Optimization for Recurrent Network Design
- Design of a Wide Input Range DC–DC Converter With a Robust Power Control Scheme Suitable for Fuel Cell Power Conversion
- Zero-Voltage and Zero-Current Switching Full-Bridge DC–DC Converter With Auxiliary Transformer
- Essential DC/DC Converters
- Reaching High Power Density in Multikilowatt DC–DC Converters With Galvanic Isolation
- A QoS multicast routing optimization algorithm based on genetic algorithm
- Complete automotive electrical system design
- Design of Power Converters by Optimization Under Multiphysic Constraints: Application to a Two-Time-Scale AC/DC–DC Converter