Novel Bragg grating distributed-strain sensor based on phase measurements

Shaoxian Huang, Myo M. Ohn, Raymond M. Measures · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 1995

We recently disclosed that the shape of the intensity spectrum reflected from a Bragg grating can serve as an indicator of strain gradient across this grating. However, in principle, to map the strain field distribution, both the intensity spectrum (Iota) ((lambda) ) and the phase spectrum (Psi) ((lambda) ) are needed. In this paper, we propose a method based on phase measurements. It relies on the correlation between the wavelength-dependent penetration depth of light in a nonuniform (chirped) grating and the phase delay of the reflected wave. If we know that the nonuniform strain field to be measured is a monotonic function of position along the grating (which is the most practical case), then the measured grating phase-spectrum (Psi) ((lambda) ) can be used to evaluate the penetration depth and consequently the distribution of the grating optical pitch-lengths, i.e. the strain distribution over the grating. Theory reveals that the phase slope spectrum d(Psi) ((lambda) )/d(lambda) induced by a grating can directly yield the strain field profile. For example, a linear phase slope spectrum indicates a linear chirp in the grating due to a constant strain gradient; and the strain gradient can be easily obtained from the dispersion constant d2(Psi) ((lambda) )/d(lambda) 2. The validity of this method is also discussed in this paper.

Cited by 13 works. doi:10.1117/12.207678

Authors