High-current dc power transmission in flexible RE–Ba2Cu3O7 − δcoated conductor cables
Danko C van der Laan, Loren Frederick Goodrich, Timothy J. Haugan · Superconductor Science and Technology · 2011
Transmission cables made from high-temperature superconductors have been successfully demonstrated within the electric power grid. These cables carry an ac current of up to 3000 A in a much smaller cross-sectional area than conventional transmission lines, but they are not flexible enough for certain applications that involve very tight cable bends. Certain on-board Air Force applications require 5 MW of dc power transmission at 270 V and current of 18 500 A and would benefit from superconducting transmission in lightweight, flexible cables that would be cooled with helium gas down to about 55 K. To address these needs, we have constructed a 10 mm diameter RE–Ba 2 Cu 3 O 7 − δ (RE = rare earth) coated conductor cable that is lighter and more flexible than the current generation of superconducting cables, and that has a critical current of 7561 A at 76 K. The cable is expected to have a critical current of more than 20 000 A at 55 K and therefore will likely exceed the requirements for 5 MW on-board power transmission. The cable consists of two electrically insulated phases that can be operated in different modes, which allows us to study the effect of self-field on the cable performance.
Cited by 34 works. doi:10.1088/0953-2048/25/1/014003 Open-access PDF
Authors
References
- Kinetics and Kinematics for Translational Motions in Microgravity During Parabolic Flight
- MOCVD-Based YBCO-Coated Conductors
- YBa2Cu3O7−δcoated conductor cabling for low ac-loss and high-field magnet applications
- Large intrinsic effect of axial strain on the critical current of high-temperature superconductors for electric power applications
- Compact GdBa 2 Cu 3 O 7–δ coated conductor cables for electric power transmission and magnet applications
- Exploration of new superconductors and functional materials, and fabrication of superconducting tapes and wires of iron pnictides
- Triaxial HTS Cable for the AEP Bixby Project
- High-current Y-Ba-Cu-O coated conductor using metal organic chemical-vapor deposition and ion-beam-assisted deposition
- Phase II of the Albany HTS Cable Project
- Progress and Status of a 2G HTS Power Cable to Be Installed in the Long Island Power Authority (LIPA) Grid