Direct digital process control: Practice and algorithms for microprocessor application
David M. Auslander, Yohsuke Takahashi, M. Tomizuka · Proceedings of the IEEE · 1978
Process control applications and control algorithms suited for microprocessors are surveyed. Applications are noted both in large, general purpose process control systems and in specialized applications that have been made possible by the availability of computing power in small packages. Distributed control and use of extended data buses (data highways), both made possible by extensive use of microprocessors, are becoming standard in general purpose systems. General purpose process control systems still utilize proportional-integral-derivative (PID) algorithms and variants of them for the most part. Some recent research results on algorithms designed for use in stand-alone, single-loop calculator or microprocessor-based controllers are presented. These algorithms, which could also be used in direct digital control (DDC) systems, are specifically tailored for simple implementation in a relatively low computing power, discrete-time environment.
Cited by 74 works. doi:10.1109/proc.1978.10870
Authors
References
- Applied Optimal Control
- Linear Optimal Control
- Optimal linear regulators: The discrete-time case
- A microprocessor system for multifunctional control of upper-limb prostheses via myoelectric signal identification
- Parametereinstellung bei linearen DDC-Algorithmen
- Simple Finite-Time Settling Control and Manipulated-Variable Softening for Reverse Reaction, Overshoot, and Oscillatory Processes
- A microprocessor-based control system for solar heated/cooled residential dwellings
- Application of a bipolar microprocessor chip set to control systems
- A 16-bit microcomputer for missile guidance and control applications
- Process Control Experience and a Self-Tuning Method for a Discrete-Time, Finite Time Settling Controller/Observer