Bearing estimation using a perturbed linear array
Melvin J. Hinich · The Journal of the Acoustical Society of America · 1977
A linear hydrophone array which is towed in the ocean is subject to snakelike bending. If the array is processed as if it was truly linear, the author has shown that the bending causes a deflection of the measured bearing of a fixed source from its true bearing relative to the array. This deflection results from patterned perturbations in the true sensor positions along the nominal array axis. As the perturbation pattern changes with the flexing of the array, the source appears to move around. A probability model of the perturbations is used in order to develop a theoretical solution to the question of how the space–time information gathered by the array is best used to measure source bearing. The method which is used to reduce the bending perturbation deflection of the bearing is to group the sensors into adjacent subarrays, process these arrays over short time slices, average the subarray bearings for each time period, and then to average the average over time. This averaging method significantly improves the bearing accuracy of the source when the array is bent according to the model.
Cited by 32 works. doi:10.1121/1.381466 Open-access PDF
Authors
References
- Linear Statistical Inference and its Applications
- Three-dimensional filtering with an array of seismometers
- Optimum Passive Bearing Estimation in a Spatially Incoherent Noise Environment
- Optimum Signal Processing of Three-Dimensional Arrays Operating on Gaussian Signals and Noise
- On the Estimation of a Harmonic Component in a Time Series with Stationary Independent Residuals
- Time delay estimation
- Parameter Estimation for an $R$-Dimensional Plane Wave Observed with Additive Independent Gaussian Errors
- Bearing estimation using a large towed array
- Error analysis of velocity and direction measurements of plane waves using thick large-aperture arrays
- Least-squares array processing for signals of unknown form