Single microparticle launching method using two-stage light-gas gun for simulating hypervelocity impacts of micrometeoroids and space debris
Nobuaki Kawai, Kenji Tsurui, Sunao Hasegawa et al. · Review of Scientific Instruments · 2010
A single microparticle launching method is described to simulate the hypervelocity impacts of micrometeoroids and microdebris on space structures at the Institute of Space and Astronautical Science, Japan Aerospace Exploration Agency. A microparticle placed in a sabot with slits is accelerated using a rifled two-stage light-gas gun. The centrifugal force provided by the rifling in the launch tube separates the sabot. The sabot-separation distance and the impact-point deviation are strongly affected by the combination of the sabot diameter and the bore diameter, and by the projectile diameter. Using this method, spherical projectiles of 1.0-0.1 mm diameter were launched at up to 7 km/s.
Cited by 113 works. doi:10.1063/1.3498896
Authors
References
- High-Pressure Shock Compression of Solids III
- Facility for high-speed particle impact testing
- Hypervelocity impact studies using the 2 MV Van de Graaff accelerator and two-stage light gas gun of the University of Kent at Canterbury
- Characteristics of debris clouds produced by hypervelocity impact of aluminum spheres with thin aluminum plates
- Olympus end of life anomaly — a perseid meteoroid impact event?
- Development of the high-velocity gas-dynamics gun
- Hypervelocity impact experiments on aerogel dust collector
- Debris cloud expansion studies
- Hydrocode modelling of hypervelocity impact on brittle materials: depth of penetration and conchoidal diameter
- Development and optimization of a “micro” two-stage light-gas gun