Microfabricated Multiphase Reactors for the Selective Direct Fluorination of Aromatics
Nuria de Mas, Axel Günther, Martin A. Schmidt et al. · Industrial & Engineering Chemistry Research · 2003
We describe a microchemical reactor built by silicon processing and metal deposition techniques that enables efficient and safe direct fluorination of toluene, a highly exothermic process difficult to implement conventionally on a macroscopic scale. Gas and liquid reagents were contacted cocurrently at room temperature in the microfabricated reactor, and gas−liquid distribution patterns were characterized. A flow regime map, containing slug and annular-dry flows, was obtained for liquid velocities relevant to gas−liquid reactions in microchemical systems. During annular-dry flow operation, the substrate conversion and product distribution were studied as a function of the operating conditions: toluene concentration, fluorine-to-toluene molar ratio, solvent type, and quenching conditions. Among the solvents tested, including acetonitrile, methanol, 1,1,2-trichloro-1,2,2-trifluoroethane, and octafluorotoluene, the highest selectivities toward ring fluorination were obtained in acetonitrile. At toluene conversions of 58%, a combined selectivity of ortho -, meta -, and para -fluorotoluenes of up to 24% was obtained.
Cited by 185 works. doi:10.1021/ie020717q
Authors
References
- Chemical Reaction Engineering
- Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane)
- Micromachined Transducers Sourcebook
- Microreaction engineering — is small better?
- Microreactors
- Microfabricated Multiphase Packed-Bed Reactors: Characterization of Mass Transfer and Reactions
- Micromachined reactors for catalytic partial oxidation reactions
- Anisotropic Etching of Crystalline Silicon in Alkaline Solutions: II . Influence of Dopants
- Microfluidic systems with on-line UV detection fabricated in photodefinable epoxy
- Instability due to Viscosity and Density Stratification in Axisymmetric Pipe Flow