Organic ionic plastic crystal-based electrolytes for solid-state dye-sensitized solar cells
Qing Li, Xiaojian Chen, Jie Zhao et al. · Journal of Materials Chemistry · 2012
An organic ionic plastic crystal, 1-ethyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (P12TFSI), was synthesized and doped with a room temperature ionic liquid, 1-propyl-3-methylimidazolium iodide (PMII). The prepared PMII/P12TFSI solid-state electrolytes were employed for dye-sensitized solar cells (DSSCs), without using any volatile organic solvent. The fabricated solid-state DSSCs yielded a power conversion efficiency of 5.12% under simulated air mass 1.5 solar spectrum illuminations at 50 mW cm−2. The superior long-term stability of the fabricated solid-state DSSCs indicated that the synthesized PMII/P12TFSI solid-state electrolytes could overcome the drawbacks of cells containing volatile solvents.
Cited by 42 works. doi:10.1039/c2jm16850b
Authors
References
- A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films
- Conversion of light to electricity by cis-X2bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) charge-transfer sensitizers (X = Cl-, Br-, I-, CN-, and SCN-) on nanocrystalline titanium dioxide electrodes
- Hydrophobic, Highly Conductive Ambient-Temperature Molten Salts
- Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies
- Conversion of sunlight to electric power by nanocrystalline dye-sensitized solar cells
- A stable quasi-solid-state dye-sensitized solar cell with an amphiphilic ruthenium sensitizer and polymer gel electrolyte
- Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%
- Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator
- Advances in Liquid‐Electrolyte and Solid‐State Dye‐Sensitized Solar Cells
- Electrodeposited Nanocomposite n-p Heterojunctions for Solid-State Dye-Sensitized Photovoltaics