Code Combining--A Maximum-Likelihood Decoding Approach for Combining an Arbitrary Number of Noisy Packets
David Chase · IRE Transactions on Communications Systems · 1985
It is well known that if the data rate is chosen below the available channel capacity, error-free communication is possible. Furthermore, numerous practical error-correction coding techniques exist which can be chosen to meet the user's reliability constraints. However, a basic problem in designing a reliable digital communication system is still the choice of the actual code rate. While the popular rate-1/2 code rate is a reasonable, but not optimum, choice for additive Gaussian noise channels, its selection is far from optimum for channels where a high percentage of the transmitted bits are destroyed by interference. Code combining represents a technique of matching the code rate to the prevailing channel conditions. Information is transmitted in packet formats which are encoded with a relatively high-rate code, e.g., rate 1/2, which can be repeated to Obtain reliable communications when the redundancy in a rate-1/2 code is not sufficient to overcome the channel interference. The receiver combines noisy packets (code combining) to obtain a packet with a code rate which is low enough such that reliable communication is possible even for channels with extremely high error rates. By combining the minimum number of packets needed to overcome the channel conditions, the receiver optimizes the code rate and minimizes the delay required to decode a given packet. Thus, the receiver adapts to the actual jammer-to-signal(J/S)ratio which is critical when the level of interferenceJis not known a priori.
Cited by 911 works. doi:10.1109/tcom.1985.1096314
Authors
References
- ERROR CORRECTING CODES
- Viterbi Decoding for Satellite and Space Communication
- Error-Correcting Codes, 2nd ed
- The Spread Spectrum Concept
- A Modified Selective-Repeat Type-II Hybrid ARQ System and Its Performance Analysis
- An Improved Selective-Repeat ARQ Strategy
- Retransmission Error Control with Memory
- Efficient Selective Repeat ARQ Strategies for Very Noisy and Fluctuating Channels
- Capacity Limits for Binary Codes in the Presence of Interference
- Communications systems research