The GRASP Multiple Micro-UAV Testbed
Nathan Michael, Daniel Mellinger, Quentin Lindsey et al. · IEEE Robotics & Automation Magazine · 2010
In the last five years, advances in materials, electronics, sensors, and batteries have fueled a growth in the development of microunmanned aerial vehicles (MAVs) that are between 0.1 and 0.5 m in length and 0.1-0.5 kg in mass [1]. A few groups have built and analyzed MAVs in the 10-cm range [2], [3]. One of the smallest MAV is the Picoftyer with a 60-mmpropellor diameter and a mass of 3.3 g [4]. Platforms in the 50-cm range are more prevalent with several groups having built and flown systems of this size [5]-[7]. In fact, there are severalcommercially available radiocontrolled (PvC) helicopters and research-grade helicopters in this size range [8].
Cited by 768 works. doi:10.1109/mra.2010.937855
Authors
References
- ROS: an open-source Robot Operating System
- Design and control of quadrotors with application to autonomous flying
- Energy-efficient Autonomous Four-rotor Flying Robot Controlled at 1 kHz
- A simple learning strategy for high-speed quadrocopter multi-flips
- Coordination and Control of Multiple UAVs
- A simple learning strategy for high-speed quadrocopter multi-flips
- Challenges Facing Future Micro-Air-Vehicle Development
- Quadrotor Helicopter Trajectory Tracking Control
- Indoor Multi-Vehicle Flight Testbed for Fault Detection, Isolation, and Recovery
- Control of a Quadrotor Helicopter Using Dual Camera Visual Feedback