Understanding automatic generation control
Nasser Jaleeli, Louis S. VanSlyck, D.N. Ewart et al. · IEEE Transactions on Power Systems · 1992
The authors describe what automatic generation control (AGC) might be expected to do, and what may not be possible or expedient for it to do. The purposes and objectives of AGC are limited by physical elements involved in the process and, hence, the relevant characteristics of these elements are described. For reasons given, it is desired that AGC act slowly and deliberately over tens of seconds or a few minutes. From a perspective of utility operations, there is no particular economic or control purpose served by speeding up the AGC action.>
Cited by 708 works. doi:10.1109/59.207324
Authors
References
- Optimum Megawatt-Frequency Control of Multiarea Electric Energy Systems
- The Megawatt-Frequency Control Problem: A New Approach Via Optimal Control Theory
- Response of Steam and Hydroelectric Generating Plants to Generation Control Tests
- A simplified non-linear model of a drum boiler-turbine unit†
- Variable, nonlinear tie-line frequency bias for interconnected systems control
- Discrete-mode automatic generation control of a two-area reheat thermal system with new area control error
- Modified automatic time error control and inadvertent interchange reduction for the WSCC interconnected power systems
- Modern Power System Analysis
- Interrelationship of Time Error, Frequency Deviation, and Inadvertent Flow on an Interconnected System
- Inertial, Governor, And Agc/Economic Dispatch Load Flow Simulations Of Loss Of Generation Contingencies