YBCO/Ag bulk material by melt crystalization for cryomagnetic applications
Peter Schätzle, Gernot Krabbes, Stefan Gruss et al. · IEEE Transactions on Applied Superconductivity · 1999
Based on thermoanalytic investigations a melt crystallization process was developed with reduced process temperatures and process times to produce YBCO/Ag monoliths (d=26 mm) achieving the homogenous distribution of small sized Ag inclusions. The mechanical properties are improved, but the superconducting properties at 77 K, B/sub 0/ (480 mT) and F/sub N/ (40 N) are slightly reduced compared with YBCO monoliths without an addition of Ag (750 mT and 65 N). The maximum trapped flux was increased to the value B/sub 0/ 9.4 T at 26.5 K, instead of 8.4 T in the Ag-free bulk monolith.
Cited by 52 works. doi:10.1109/77.784861
Authors
References
- Damage caused by magnetic pressure at high trapped field in quasi-permanent magnets composed of melt-textured YBaCuO superconductor
- High trapped fields in bulk YBa2Cu3O7−δ samples at temperatures around 50 K
- Modified melt texturing process for YBCO based on the polythermic section YO1.5“Ba0.4Cu0.6O” in the YBaCuO phase diagram at 0.21 bar oxygen pressure
- Growth and possible size limitation of quality single-grain YBa2Cu3O7
- Comparison of the levitation forces of melt-processed YBaCuO superconductors for different magnets
- High trapped fields in melt-textured YBCO samples
- Effects of silver doping in the high-T c superconductor system Y-Ba-Cu-O
- The influence of Ag on univariant reactions and the oxygen content of the eutectic melt in the Y–Ba–Cu–(Ag)–O system
- Microstructural and magnetisation study in melt-grown YBaCuO samples
- Large domain growth of Ag-doped YBaCuO-system superconductor