Comparison Between Finite-Element Analysis and Winding Function Theory for Inductances and Torque Calculation of a Synchronous Reluctance Machine
Thierry Lubin, Tahar Hamiti, Hubert Razik et al. · IEEE Transactions on Magnetics · 2007
This paper compares the prediction of two independent methods for calculating electromagnetic torque and inductances of a synchronous reluctance machine under linear condition. One method is based on winding function analysis (WFA) and the other on finite-element analysis (FEA). Both methods take into account the rotor geometry, the stator slot effects and the stator winding connections. The simulation results obtained by the WFA are compared with the ones obtained by two-dimensional FEA. It is shown that the two methods give approximately the same results but require different computation times.
Cited by 122 works. doi:10.1109/tmag.2007.900404
Authors
References
- Analysis of Electric Machinery
- Finite Element Method Magnetics
- Analysis and simulation of five-phase synchronous reluctance machines including third harmonic of airgap MMF
- Design refinement of synchronous reluctance motors through finite-element analysis
- Inductances of cageless reluctance-synchronous machines having nonsinusoidal space distributions
- Modeling and Simulation of a Salient-Pole Synchronous Generator With Dynamic Eccentricity Using Modified Winding Function Theory
- Inductances of cageless reluctance-synchronous machines having nonsinusoidal space distributions
- Efficiency evaluations of synchronous reluctance motor using coupled FEM and preisach modeling
- Determination of effective air-gap length of reluctance synchronous motors from experimental data