An improved anodic bonding process using pulsed voltage technique
Thomas M. H. Lee, I‐Ming Hsing, Connie Y.N Liaw · Journal of Microelectromechanical Systems · 2000
In this study, we report a pulsed-voltage technique that is commonly employed in the electroplating industry to achieve a more efficient Si-glass anodic bonding process than the conventional constant electric field process. This technique features a less stringent voltage requirement and a shortened bonding time without compromising the tensile strength of the bonded structure. A square waveform voltage profile is used to investigate the effects of pulsed-voltage profile on the bonding time. In particular, the effects of magnitude of the base voltage and duration of the peak and base voltages are investigated. With peak and base voltages set to 400 and 300 V, respectively, and the duration of each voltage pulse fixed at 10-30 s, the bonding time is reduced to 30% of that required by a constant field process (400 V). Tensile strength of all completely bonded Si-glass pairs prepared by this technique is greater than 15 MPa. A postulated bonding mechanism based on the experimental results is presented.
Cited by 158 works. doi:10.1109/84.896767
Authors
References
- Wafer-to-wafer bonding for microstructure formation
- Vacuum packaging for microsensors by glass-silicon anodic bonding
- Direct‐Current Polarization During Field‐Assisted Glass‐Metal Sealing
- A Field‐Assisted Bonding Process for Silicon Dielectric Isolation
- Selection of glass, anodic bonding conditions and material compatibility for silicon-glass capacitive sensors
- The mechanism of field-assisted silicon-glass Bonding
- Characterization of the electrostatic bonding of silicon and Pyrex glass
- Optimization of the performance of the polymerase chain reaction in silicon-based microstructures
- Low-temperature direct bonding of silicon and silicon dioxide by the surface activation method
- Diffuser-element design investigation for valve-less pumps