Substrate crosstalk reduction using SOI technology
Jean‐Pierre Raskin, A. Viviani, Denis Flandre et al. · IEEE Transactions on Electron Devices · 1997
This work analyzes both by simulations and measurements the substrate crosstalk performances of various Silicon-On-Insulator (SOI) technologies, and compares them to those of normal bulk CMOS process. The influence of various parameters, such as substrate resistivity, buried oxide thickness and distance between devices, is investigated. The use of capacitive guard rings is proposed, and their effectiveness is demonstrated. A simple RC model has been developed to allow a deep understanding of these phenomena as well as to simplify future studies of more complex systems. The superiority of high-resistivity SIMOX substrates over standard SOI and bulk is finally demonstrated.
Cited by 295 works. doi:10.1109/16.644646
Authors
References
- Operation and modeling of the MOS transistor
- Silicon-on-Insulator Technology: Materials to VLSI
- Physical limitations on the frequency response of a semiconductor surface inversion layer
- Properties of Microstrip Line on Si-SiO/sub 2/ System
- Limitations of the MOS capacitance method for the determination of semiconductor surface properties
- Experimental results and modeling techniques for substrate noise in mixed-signal integrated circuits
- Silicon-on-Insulator Technology
- Capacitance, Inductance, and CrossTalk Analysis
- Planar microwave and millimeter-wave lumped elements and coupled-line filters using micro-machining techniques
- Dielectric Relaxation