Etch rates for micromachining processing
K.R. Williams, R.S. Muller · Journal of Microelectromechanical Systems · 1996
The etch rates for 317 combinations of 16 materials (single-crystal silicon, doped, and undoped polysilicon, several types of silicon dioxide, stoichiometric and silicon-rich silicon nitride, aluminum, tungsten, titanium, Ti/W alloy, and two brands of positive photoresist) used in the fabrication of microelectromechanical systems and integrated circuits in 28 wet, plasma, and plasmaless-gas-phase etches (several HF solutions, H/sub 3/PO/sub 4/, HNO/sub 3/+H/sub 2/O+NH/sub 4/F, KOH, Type A aluminum etchant, H/sub 2/O+H/sub 2/O/sub 2/+HF, H/sub 2/O/sub 2/, piranha, acetone, HF vapor, XeF/sub 2/, and various combinations of SF/sub 6/, CF/sub 4/, CHF/sub 3/, Cl/sub 2/, O/sub 2/, N/sub 2/, and He in plasmas) were measured and are tabulated. Etch preparation, use, and chemical reactions (from the technical literature) are given. Sample preparation and MEMS applications are described for the materials.
Cited by 646 works. doi:10.1109/84.546406
Authors
References
- Silicon as a mechanical material
- CRC Handbook of Chemistry and Physics
- Diffusion in Solids
- A Comprehensive Treatise on Inorganic and Theoretical Chemistry
- Diffusion in Solids, Liquids, Gases
- Principles of Plasma Discharges and Materials Processing
- Silicon Processing for the VLSI Era
- Principles and prevention of corrosion
- Principles and prevention of corrosion
- Anisotropic Etching of Crystalline Silicon in Alkaline Solutions: I . Orientation Dependence and Behavior of Passivation Layers