Superconducting rectifier fluxpump for magnet system of the CMD-2 detector
Lev M Barkov, N.S. Bashtovoy, Sergey V. Karpov et al. · IEEE Transactions on Applied Superconductivity · 1999
A superconducting rectifier fluxpump has been used for the dc power supply of the magnet system of the CMD-2 detector on the VEPP-2M collider at the Budker Institute of Nuclear Physics in Russia since 1989. The fluxpump provides a complete pumping cycle: charging the magnet system, stabilization of the magnetic field, and discharging. The fluxpump consists of an air-core current step-up superconducting transformer and two groups of thermally controlled superconducting switches arranged as a fullwave rectifier. Critical output current during the test was 5.4 kA. The accuracy of the field stabilization provided by the fluxpump is 2.5/spl middot/10/sup -5/. The fluxpump has exhibited reliable and safe operation during its entire history of use.
Cited by 25 works. doi:10.1109/77.791914
Authors
- Lev M Barkov
- N.S. Bashtovoy
- Sergey V. Karpov
- Victor S. Okhapkin
- Alexander A. Ruban
- V.P. Smakhtin
- I.G. Snopkov
- I. V. Zhuravkov
References
- Fully superconducting rectifiers and fluxpumps Part 1: Realized methods for pumping flux
- High current and high power superconducting rectifiers
- A thermally switched 9 kA superconducting rectifier fluxpump
- Status report of the three phase 25 kA, 1.5 kW thermally switched superconducting rectifier, transformer and switches
- Software of the Slow Control System for the CMD-2 Detector
- Study of full-wave superconducting rectifier-type flux-pumps
- A novel miniature superconducting converter for 1 kA magnets
- Cryotron converters for the supply of superconducting magnet windings