충돌해석 시 동적인장물성 불확도의 영향 평가
정세환, 허훈, 최민국 et al. · 한국자동차공학회 추계학술대회 및 전시회 · 2011
This research is concerned with the standard uncertainties in the tensile properties of auto-body steel considering strain rate effects and effects of uncertainties of tensile properties on crash analyses. A procedure to obtain plastic true stress data and analytic uncertainty model are established. Uncertainty sources in the high-speed tensile test are summarized. Standard uncertainties in measuring input quantities such as load, length, thickness, and width of the specimens are calculated, as are their associated sensitivity coefficients. Uncertainty induced by the FFT smoothing process used to reduce unnecessary signal in acquired data is also considered. Image analysis using a high-speed camera is performed in order to measure the length of the specimen during the high-speed tensile test. Combined standard uncertainty is then evaluated for the true stress data of an auto-body steel sheet at intermediate strain rates. Crash analysis of a square tube is performed with measured true stress data considering standard uncertainties. In the analyses, maximum and minimum values of true stress data in the range of expanded uncertainty are applied into the analyses. Finally, effects of the uncertainties on the crash analyses are quantitatively evaluated.
Cited by 5 works.