가스터빈 블레이드 끝단 형상에 따른 블레이드 끝단 및 그 주변에서의 열전달 계수 변화

곽재수 · 2006

Detailed heat transfer coefficient distributions on two types of gas turbine blade tip, plane tip and squealer tip, were measured using a hue-detection base transient liquid crystals technique. The heat transfer coefficients on the shroud and near tip regions of the pressure and suction sides of the blade were also measured. The heat transfer measurements were taken at the three different tip gap clearances of 1.0%, 1.5%, and 2.5% of blade span. Results show the overall heat transfer coefficients on the tip and shroud with squealer tip blade were lower than those with plane tip blade. By using squealer tip, however, the reductions of heat transfer coefficients near the tip regions of the pressure and suction sides were not remarkable.

Cited by 0 works.

Authors