폐기물 처리를 위한 다축 스크류 난류접촉식 건조기 최적 설계 연구

신미수, 장동순, 나은수 et al. · 유기성자원학회 학술발표대회논문집 · 2011

A specially designed dryer has been developed for the thermal treatment of dehydrated, highly viscous waste such as sewage sludge by an gas-agitated, multi-screw type dryer system. The treatment capacity of multi-screw type dryer was about 1,000 ㎏/h. It consists of burner, feeding hopper, hot gas supplying ducts with double screw conveyor, damper and outlets of drying gas and dried material. A screw-type dryer is carefully designed to have the ability of robust sludge transport for various drying materials without any significant coagulating lumping phenomenon during heating and material transport process. As a first step in our numerical study, we calculated turbulent reacting flows associated with heat and mass transfer. It is reported that the drying rate is significant influenced by the characteristics of flue gas such temperature and velocity. Therefore, combustion reaction inside a rotating screw conveyer is solved to analyze the temperature profile and amount of hot gas supplied to sludge. A k-e turbulence model is incorporated for the evaluation Reynolds stresses. A eddy breakup model in which all reaction rates are governed by turbulence mixing only and expressed by the eddy breakup time and the concept of the stoichiometric balance of mean concentration of major species is involved for the combustion reaction model. A system of discretized linear equations is solved iteratively due to the nonlinear feature of the implicit equation. The flue gas distribution into holes can be estimated together with the corresponding data. This information will be considered as a useful feedback data for optimun system design. The incorporation of a proper turbulent reaction model of nonlinear term appeared by gas and solid phase is considered as one of the important tasks for the more accurate resolution in near future.

Cited by 0 works.

Authors