A generic methodology for deriving compact dynamic thermal models, applied to the PSGA package
Filip Christiaens, Bart Vandevelde, Eric Beyne et al. · IEEE Transactions on Components Packaging and Manufacturing Technology Part A · 1998
A novel methodology for synthesizing compact, boundary condition independent, dynamic thermal models is represented. The resulting compact resistor/capacitor network accurately predicts the dynamic junction temperature response under any arbitrary set of external cooling conditions. The network is derived in two successive steps. First, a boundary condition independent resistor network is synthesized using steady-state finite element data for a large set of practical boundary conditions. Next, the general resistor network is expanded with discrete thermal capacitors featuring the thermal mass of the package. The value of the capacitors and their exact location within the resistor network is determined using frequency response finite element data for a limited set of boundary conditions. This paper focuses primarily on the second step, i.e., synthesis of the dynamic (capacitive) network elements. The synthesis method is successfully demonstrated for two types of polymer stud grid array (PSGA) packages, the standard PSGA and the thermally enhanced PSGA. It is shown that the thermal mass of a PSGA package can be lumped into five discrete thermal capacitances. For both the standard and the thermally enhanced PSGA, the generic compact dynamic network models can predict time dependent junction temperature profiles within an accuracy of 5%.
Cited by 83 works. doi:10.1109/95.740049 Open-access PDF
Authors
References
- Fine structure of heat flow path in semiconductor devices: A measurement and identification method
- A new evaluation method of thermal transient measurement results
- Analysis of thermal transient data with synthesized dynamic models for semiconductor devices
- Thermal characterization of electronic devices with boundary condition independent compact models
- The world of thermal characterization according to DELPHI-Part I: Background to DELPHI
- The world of thermal characterization according to DELPHI-Part II: Experimental and numerical methods
- Ion Beam Assisted Deposition of Metal Organic Films Using Focused Ion Beams
- Compact models for accurate thermal characterization of electronic parts
- Designing with thermal impedance
- Thermal Characterization of Electronic Devices by Means of Improved Boundary Condition Independent Compact Models