A dynamic voltage scaled microprocessor system
Thomas D. Burd, Trevor Pering, A. Stratakos et al. · IEEE Journal of Solid-State Circuits · 2000
A microprocessor system is presented in which the supply voltage and clock frequency can be dynamically varied so that the system can deliver high throughput when required while significantly extending battery life during the low speed periods. The system consists of a dc-dc switching regulator, an ARM V4 microprocessor with a 16-kB cache, a bank of 64-kB SRAM ICs, and an I/O interface IC. The four custom chips were fabricated in a standard 0.6-/spl mu/m 3-metal CMOS process. The system can dynamically vary the supply voltage from 1.2 to 3.8 V in less than 70 /spl mu/s. This provides a throughput range of 6-85 MIPS with an energy consumption of 0.54-5.6 mW/MIP yielding an effective energy efficiency as high as 26200 MIPS/W.
Cited by 916 works. doi:10.1109/4.881202
Authors
References
- Low-power CMOS digital design
- Low-Power CMOS Digital Design
- Digital integrated circuits : a design perspective
- The simulation and evaluation of dynamic voltage scaling algorithms
- Low-power operation using self-timed circuits and adaptive scaling of the supply voltage
- A 160-MHz, 32-b, 0.5-W CMOS RISC microprocessor
- Variable supply-voltage scheme for low-power high-speed CMOS digital design
- CMOS scaling for high performance and low power-the next ten years
- Voltage scheduling in the IpARM microprocessor system
- Data driven signal processing: an approach for energy efficient computing