Experimental study of a new kind of superconducting inductor
Philippe Masson, Jean Lévêque, Denis Netter et al. · IEEE Transactions on Applied Superconductivity · 2003
Electrical motors need a spatial variation of the flux density created by their inductors to make torque. We propose to achieve this angular repartition of the induction with bulk high temperature superconducting plates and two low temperature superconducting solenoids. These solenoids have the same axis and are fed with opposite currents in order to create a radial magnetic induction. Four superconducting plates placed on the cylindrical surface, situated on the same axis and having the same radius as the solenoids, concentrate the magnetic field. This device provides a spatial variation of the flux density, and can be considered as an inductor for a synchronous motor with eight poles. This paper presents the experimental study of our prototype at 4.2 K. We compare the experimental results with calculation. Ten Hall probes permit us to reconstitute the angular variation of the flux density. The paper shows the feasibility of this new kind of superconducting inductor.
Cited by 32 works. doi:10.1109/tasc.2003.813055
Authors
References
- Superconducting reluctance motors with YBCO bulk material
- 150-kW experimental superconducting permanent-magnet motor
- Magnetisation and instability in melt-textured YBa2Cu3O7 at low temperature and high fields up to 23 T
- Experimental study on a high-Tc superconducting permanent magnet
- Magnetic field concentration: comparison between several shapes of superconducting shields
- Flux jumps in Y-123 and La-214