AC Transport Losses Calculation in a Bi-2223 Current Lead Using Thermal Coupling With an Analytical Formula
Kévin Berger, Jean Lévêque, Denis Netter et al. · IEEE Transactions on Applied Superconductivity · 2005
When a superconductor is fed with an alternating current, the temperature rise created by the losses tends to reduce the current carrying capacity. If the amplitude of the current exceeds the value of the critical current, then the losses become particularly high and the thermal heating considerable. In this paper, a numerical and an analytical model which allow to estimate AC transport losses are presented. These models, which use the expression of I/sub c/(T) and n(T), are available for any applied current (below and above I/sub c/). The results are compared and the validity of the analytical model is considered. Then, the analytical formula allows to easily obtain the thermoelectric balance point of the system, when the losses and the temperature do not vary any more. Moreover, a maximum value of the current transport, beyond which the balance point does not exist, is detected. Indeed, when this maximum value is exceeded, the system is not stable and, say, superconducting current leads may quench.
Cited by 20 works. doi:10.1109/tasc.2005.849149
Authors
References
- Semi-empirical model of the losses in HTS tapes carrying AC currents in AC magnetic fields applied parallel to the tape face
- Temperature of Bi-2223/Ag samples in the resistive section of I?V curves
- Pinning potential, its relativity and dependence on temperature and magnetic field studied on the basis of theI-Vcharacteristics of multifilamentary superconductors
- Optimum working temperature of power devices based on Bi-2223 superconductors
- Model of the temperature dependence of the hysteresis losses in a high-temperature superconductor
- Calculation of losses in a HTS current lead with the help of the dimensional analysis
- APPLICATION OF HTS BI-2223 FOR CURRENT LEADS OF SUPERCONDUCTING MAGNETS
- Calorimetric study of the thermal conductivity of superconducting tapes: experimental method and simulations
- Simulation of thermal conduction and boiling heat transfer and their impact on the stability of high-temperature superconductors