Temperature-aware microarchitecture
Kevin Skadron Y, Mircea R. Stan, Karthik Sankaranarayanan et al. · ACM Transactions on Architecture and Code Optimization · 2004
With cooling costs rising exponentially, designing cooling solutions for worst-case power dissipation is prohibitively expensive. Chips that can autonomously modify their execution and power-dissipation characteristics permit the use of lower-cost cooling solutions while still guaranteeing safe temperature regulation. Evaluating techniques for thisdynamic thermal management(DTM), however, requires a thermal model that is practical for architectural studies.This paper describesHotSpot, an accurate yet fast and practical model based on an equivalent circuit of thermal resistances and capacitances that correspond to microarchitecture blocks and essential aspects of the thermal package. Validation was performed using finite-element simulation. The paper also introduces several effective methods for DTM: "temperature-tracking" frequency scaling, "migrating computation" to spare hardware units, and a "hybrid" policy that combines fetch gating with dynamic voltage scaling. The latter two achieve their performance advantage by exploiting instruction-level parallelism, showing the importance of microarchitecture research in helping control the growth of cooling costs.Modeling temperature at the microarchitecture level also shows that power metrics are poor predictors of temperature, that sensor imprecision has a substantial impact on the performance of DTM, and that the inclusion of lateral resistances for thermal diffusion is important for accuracy.
Cited by 795 works. doi:10.1145/980152.980157 Open-access PDF
Authors
References
- The SimpleScalar tool set, version 2.0
- Wattch
- Design challenges of technology scaling
- Dynamic thermal management for high-performance microprocessors
- Temperature-aware microarchitecture
- Proceedings of the International Symposium On Circuits And Systems
- Basic Block Distribution Analysis to Find Periodic Behavior and Simulation Points in Applications
- Managing the Impact of Increasing Microprocessor Power Consumption
- Control-theoretic techniques and thermal-RC modeling for accurate and localized dynamic thermal management
- Thermal management system for high performance PowerPC/sup TM/ microprocessors