Methane/GOX Air Augmented Rocket Plume Testing
Trevor Foster, David Gist, Dianne J. DeTurris · AIAA Aerospace Sciences Meeting · 2009
An experimental study was performed to investigate primary flow plume expansion and its effects on aerodynamic choking inside a fixed geometry ejector. An oxygen and methane thruster, enclosed within a fixed rectangular duct, was ignited to entrain ambient air through secondary ducting. Primary and secondary flow mixing occurred in a downstream mixing duct. Plume interactions in the mixing duct were visible through optically clear glass. Primary stagnation pressure was varied from 325 psi to 1032 psi over a series of runs. Video provided qualitative visual references while pressure transducers and thermocouples characterized the flow and plume behavior on a quantitative level. Results indicated that the location of restriction for the secondary flow in the mixing duct was between 2 and 3 inches downstream of the primary exit plane and independent of primary chamber pressure and primary flow temperature. Hot testing achieved a maximum total pressure ratio of 74. Evidence indicated that the secondary flow was nearing the Fabri limit; however, no reduction in entrainment occurred.
Cited by 4 works. doi:10.2514/6.2009-1378
Authors
References
- Rocket Propulsion Elements
- Engineering Fluid Mechanics
- Modern Engineering for Design of Liquid-Propellant Rocket Engines
- Supersonic Air Ejectors
- Theory and experiments on supersonic air-to-air ejectors.
- Comparison of one-dimensional solutions with Fabri theory for ejectors
- Analysis of two-phase ejectors with Fabri choking
- Examination of Fabri Choking in a Simulated Air Augmented Rocket
- Measurement of confined supersonic, 2-d jet lengths using the hydraulic analogy
- Effect of Fabri choking on the performance of two-phase jet pumps