High performance parallel coupled microstrip filters
Alfy Riddle · IEEE MTT-S International Microwave Symposium digest · 2003
A construction technique is described that allows microstrip parallel-coupled filters to have greater passband symmetry while largely removing the parasitic passband at twice the center frequency. The filter design extends the odd mode phase length by allowing the coupled lines to overlap with lines outside the resonator proper, i.e. the coupling gap of the resonator is extended out onto the 50- Omega lines. The even-mode length has been set by the distance between the 50- Omega lines. Thus, the reference plane for the even mode has been moved into the resonator. This configuration makes the odd-mode length longer than the even mode and thus compensates for the phase velocity difference between modes.>
Cited by 99 works. doi:10.1109/mwsym.1988.22066
Authors
References
- Parallel-Coupled Transmission-Line-Resonator Filters
- Handbook of microwave integrated circuits
- Theory of Electrical Filters
- Theory of electrical filters
- Accurate Wide-Range Design Equations for the Frequency-Dependent Characteristic of Parallel Coupled Microstrip Lines
- Parallel-Coupled-Line Filters for Inverted-Microstrip and Suspended-Substrate MIC's
- 18-30 GHz Broadband Bandpass Harmonic Reject Filter