Micro mixer with fast diffusion
Ryo Miyake, T.S.J. Lammerink, M. Elwenspoek et al. · Proceedings, IEEE micro electro mechanical systems · 2002
A concept for micromixing of liquid is introduced, and its feasibility is demonstrated. The mixer allows fast mixing of small amounts of two liquids and is applicable to microliquid handling systems. The mixer has a channel for the liquid, an inlet port for the reagent, a 2.2-mm*2-mm*330- mu m mixing area, and 400 micronozzles (15 mu m*15 mu m) through with a reagent is injected into the sample liquid. The resulting microplumes greatly increase the contact surface between the two liquids and hasten the speed of the mixing by diffusion. The fabrication process is extremely simple. The mixing is complete within a few seconds; a homogeneous state of mixing is reached in 1.2 s when the total volume injected is 0.5 mu l and the injection flow rate is 0.75 mu l/s.>
Cited by 141 works. doi:10.1109/memsys.1993.296914
Authors
References
- Miniaturized total chemical analysis systems: A novel concept for chemical sensing
- Numerical Simulation of Reactive Flow
- A thermopneumatic micropump based on micro-engineering techniques
- Normally close microvalve and micropump fabricated on a silicon wafer
- Normally closed microvalve and mircopump fabricated on a silicon wafer
- Numerical Simulation of reactive flow
- Micromachined silicon microvalve
- Integrated micro-liquid dosing system
- Organic Electronic Spectral Data
- Advances in chromatography