Coupled Rectangular Bars Between Parallel Plates
W.J. Getsinger · IEEE Transactions on Microwave Theory and Techniques · 1962
Curves are presented giving the even-mode fringing capacitance, the odd-mode fringing capacitance, and the difference between odd- and even-mode fringing capacitances for wide ranges of thickness and spacing of rectangular bars centered between parallel plates. Simple formulas are given relating these capacitances to even- and odd-mode characteristic impedances of coupled rectangular bars. possible applications to strip-line and other circuits are described. The appendix gives the derivation of the fringing, capacitances by conformal mapping techniques. The results are exact for bars extending in width infinitely far from the coupling region, and have only small error (less than 1.24 per cent) for bars whose width is greater than about 35 per cent of the difference between plate spacing and bar thickness.
Cited by 214 works. doi:10.1109/tmtt.1962.1125447
Authors
References
- Static and Dynamic Electricity
- Coupled-Strip-Transmission-Line Filters and Directional Couplers
- Shielded Coupled-Strip Transmission Line
- Handbook of Elliptic Integrals for Engineers and Physicists
- Directional Electromagnetic Couplers
- Problems in Strip Transmission Lines
- Theory of Functions of a Complex Variable.
- Design of Wide-Band (and Narrow-Band) Band-Pass Microwave Filters on the Insertion Loss Basis
- Thickness Corrections for Capacitive Obstacles and Strip Conductors
- Microwave Filters and Coupling Structures.