경사 충돌하는 긴 관통자에 대한 비행판재의 방호성능 수치해석
유요한 · 대한기계학회 춘추학술대회 · 2002
The protection capability of steel flying plates against a tungsten heavy alloy long rod penetrator was simulated using NET3D code. The major variables considered in this work includes penetrator’s initial velocity (1.5~2.5 km/s), speed of the plates moving away from each other (0.2~0.5 km/s), and thickness ratios of upper to lower plates, i.e., 5/0, 3.3/1.7, 2.5/2.5, 1.7/3.3, and 0/5. Based upon the residual kinetic energy of the penetrator after passing through the flying plate system and deformation characteristics of plates, in general, the protection capability of the flying plate system increased with an increase in the ratio of lower plate thickness. This implied that the motion of the lower plate was more important than that of the upper one for an efficient disturbance to the progress of the penetrator. Such a trend was shown to be best exploited when the relative velocity between the penetrator and the lower plate was appropriate. As the velocity of the penetrator and flying plates increased, width and height of the penetration hole generated in the flying plates increased, thereby reducing the residual kinetic energy of the penetrator. A design guideline for an effective flying plate protection structure was proposed based on the simulation results.
Cited by 0 works.