방오 도료가 도장된 평판에 대한 항력 성능 연구
백부근, 김경열, 조성락 et al. · 2013
In the present study, the flat plate model test method is developed to evaluate the skin friction of the marine coating in the cavitation tunnel. Six-component force balance is used to measure the profile drag of the flat plate and strut. LDV(laser Doppler velocimetry) technique is also employed to evaluate the drag and to figure out the reason of the drag reduction. The flow velocities above the surface can be used to assess the skin friction, combined with direct force measurement. Since the vortical structure in the coherent turbulence structure influences on the skin friction in the high Reynolds number regime, the interaction between the turbulence structure and the surface wall is paying more attention. This sort of thing is important in the passive control of the turbulent boundary layerbecause the skin friction can’t be determined only by wall condition. As complicated flow phenomena exist around a paint film, systematic measurement and analysis are necessary to evaluate the skin friction appropriately.
Cited by 0 works.
Authors
References
- Antifouling technology—past, present and future steps towards efficient and environmentally friendly antifouling coatings
- A Synthesized Model of the Near-Wall Behavior in Turbulent Boundary Layers.
- 2축 POD 여객선의 조종운동 수학모형 특성 연구
- 프로펠러 회전류에서 작동하는 방향타의 받음각 특성 연구
- The effect of Reynolds number on boundary layer turbulence
- PIV Velocity Field Measurements of Flow around a Ship with Rotating Propeller
- 리블렛 표면을 이용한 난류 유동해석 및 마찰 저항감소