미러 타입 컨쥬게이트 캠의 설계와 가공에 관한 연구
조현덕, 김유종, 용부중 et al. · 한국공작기계학회 논문집 · 2005
A mirror cam mechanism, a kind of conjugate cam mechanism, consists of two cams, two rollers, and two links. Since profiles of two mirror cams are identical, a simultaneous machining of two cams is achievable. Some machining errors on cam profiles do not result in the internal acting force, which often causes problems in high speed cam mechanism, between two links. Also, since angular accelerations of two links are same, the internal acting force by the difference of the angular accelerations does not occur in the mechanism. Thus the mirror cam mechanism is very useful in high speed machinery. This paper studies a design method as well as a machining method, and develops an exclusive CAD/CAM software for mirror cam profiles. The developed CAD/CAM software is applied to a typical mirror cam mechanism, and a mock-up equipment is built in order to test the machined mirror cam. Experimental investigations show that the contact between cam surface and roller surface according to cam rotation agrees well with the simulation on the developed CAD/CAM software.
Cited by 0 works.