이산화티타늄계 광촉매를 이용한 톨루엔의 처리 특성
이치영, 송민종 · 한국환경관리학회 학술연구발표회 논문초록집 · 2002
This study examined the impact of catalyst structure, light intensity, existence of oxygen as an electron acceptor and Toluene initial concentration on the reaction kinetics. The Toluene diluted with mixture air or nitrogen gas. Flow rates for test gas stream were conta-olled by micro flow meter going out the reactor. The reactor illuminated with 15 W near-UV lamp, BLB lamp or Fluorescent lamp. The light intensity at the catalyst surface were estimated to be 0.8 to 6 mW cm-2s-1. The inner cell of the reactor was packed with ball type titanium dioxide(Φ 6 mm). Using the anatase type photocatalyst, Touene conversion rate is greater than that of rutile(86.1% conversion of 100 ppmv Toluene using anatase type photocatalyst, 78% conversion of 100 ppmv Touene using rutile type photocatalyst at 0.5 L/min) Effect of light intensity on the rate of Toluene photocatalytic decomposition was investigated by three type lamps within the reactor. When light intensity to increase, the Toluene conversion rate to increase. Using the BLB lamp showed higher activity than the Fluorescent lamp, but UV lamp showed the bight photocatalytic activity(19.1% conversion of 100 ppmv Toluene with Fluorescent lamp, 60.4% conversion of 100 ppmv Toluene with BLB lamp, 86.1% conversion of 100 ppmv Toluene with UV lamp at 0.5 L/min). Experiments with added oxygen as an electron acceptor improved the reaction rate con siderably(86.1% conversion of 100 ppmv Toluene without oxygen, 62.5% conversion of same Toluene concentration with mixture air at 0.5 L/min).
Cited by 0 works.