단일 현장타설말뚝의 변단면 분석을 통한 최적 기둥-말뚝 직경비 제안
김재영, 정상섬, 안상용 · 대한토목학회논문집 · 2013
In this study, the behavior characteristics of bent pile structures with varying cross-section was examined through the measured results of field load test. A framework for determining the bending stress is calculated based on the stresses in the circumference of the pile using 3D finite element analysis. It is found that the bending stress near the pile-column joint changes rapidly and fracture zones occurs easily at variable cross-sections in bent pile structures. Also, the optimized column-pile diameter ratio ws analyzed through the relationship between the column-pile diameter ration and lateral crack load ratio. Based on this study, the optimized column-pile diameter ratio can be obtained near the inflection point of the curve between the column-pile diameter ratio and later crack load ratio. Therefore, a present study by considering the optimized variable cross-section condition would be improved bent pile structures design.
Cited by 7 works.
Authors
References
- Correlation for Design of Laterally Loaded Piles in Soft Clay
- Lateral Resistance of Piles in Cohesive Soils
- The Ultimate Resistance of Rigid Piles against Transversal Forces
- Evaluation of p-y relationships in cohesionless soils
- Numerical analysis of pile behaviour under lateral loads in layered elastic–plastic soils
- Some numerical experiments with a three dimensional finite element model of a laterally loaded pile
- Analysis of soil resistance on laterally loaded piles based on 3D soil–pile interaction
- Effect of Lateral Rigidity of Offshore Piles Using Proposed p-y Curves in Marine Clay
- Analysis of tieback walls using proposed P–y curves for coupled soil springs
- Nonlinear three-dimensional analysis of pile group supported columns considering pile cap flexibility