다상 복합재료에 의한 전이막의 형성이 고온 마모특성에 미치는 영향

박상진, 김성진, 엄원섭 et al. · 한국윤활학회 학술대회 · 2003

The role of transfer film on high temperature wear properties of a multiphase composite was investigated using a pad-on-disk type tribometer. A novo lac resin-bonded composite based on a simple formulation with 6 ingredients (aramid pulp, cashew dust, Cu fiber, graphite, potassium titanate, and zirconium silicate) was used in this study. A non-destructive method of measuring the transfer film thickness was employed by considering the electrical resistance of the transfer film. Results showed that the wear properties of the composite were significantly affected by the temperature at the friction interface while the transfer film was formed on the counter face during sliding. The wear loss of the composite at elevated temperatures was mainly due to the thermal decomposition of organic ingredients beyond the decomposition temperatures. In particular, the transfer film on the disk surface was well developed at approximately 200℃, resulting in the improved wear resistance. It suggested that the transfer film on the disk surface effectively prevented direct contacts between the composite and counter surface. On the other hand, no apparent relationship between transfer film thickness and friction coefficient was found in this experiment.

Cited by 0 works.

Authors