Исследование поверхности модифицированных углеродных волокон методом инверсионной газовой хроматографии

Elvira R. Valinurova, Г. Ф. Фазылова, Florida Kh. Kudasheva · Вестник Башкирского университета · 2014

For development of new directions of use of activated carbon fibers and reasonable choice of adsorbents for specific technological purposes, knowledge of their porous structure and surface chemistry is required. In the work, the adsorption properties of the original and modified carbon fibers by the method of inversion gas chromatography are studied. Modification of carbon fibers was carried out by boiling in the solution of concentrated sulfuric acid and deposition of silver nanoparticles. As the test-adsorbents organic matter simulating various types of intermolecular interactions: n-alkanes, arena, aliphatic alcohols, esters, ketones, acetonitrile, and chloroform were used. Retention parameters of test-adsorbents in Henry field were defined. It was shown that the retention of n-hexane, benzene, ethyl acetate, acetone on modified carbon fibers increased. The adsorption isotherms in the temperature range 200-300 °C were studied. It was found that the adsorption isotherms of all compounds are linear at low concentrations, and can be attributed to Henry isotherms. Differential molar change in internal energy test-adsorbents were calculated.. It is shown that the introduction of a carbon fiber silver nanoparticles increases in 1.5-2 times the differential heat of adsorption for aromatic hydrocarbons, alcohols, esters. The contribution of dispersion, induction-orientation, electron-donor and acceptor intermolecular interactions to the total heat of adsorption were studied. The oxidation of the surface of carbon fiber enhances induction-orientation and electron-acceptor interactions. Adsorption of the test-adsorbents occurs primarily due to Van der Waals interactions, regardless of the method of modifying carbon fibers. By the semi-contact method of atomic-force microscopy using a microscope Agilent Technologies 5500 Scanning Probe Microscopy, AFM images of carbon fibers were received.

Cited by 0 works.

Authors