Анализ переходных процессов в последовательном колебательном контуре
Александр Викторович Сапрыка · Восточно-Европейский журнал передовых технологий · 2013
The article analyzes the transients in a series oscillatory circuit used to fire the high-intensity discharge lamps of DNaT type. The studies have shown that in the transient mode the voltage on the resonant fire capacitor can be several times higher than the voltage applied to the circuit. This mode is of practical interest for the fire of a lamp of DNaT type. The values of the circuit elements were chosen according to the L, r, C of the starting controller of the lamps of DNaT type. A similar phenomenon occurs when feeding both DC and AC voltages to the input of the chain under consideration. Therefore, to understand which form of voltage in the input of the starting controller is more preferable from the point of view of energy conservation, it is necessary to carry out the research and to determine the power consumption when feeding the constant and sinusoidal voltages to the input of the circuit
Cited by 0 works.