콘크리트 이어붓기 시공에 있어 차단성에 관한 실험적 연구
김은호, 정덕우, 한민철 et al. · 2002
This study is intended is to analyze the blocking performance with variation of the gap of bar and kinds of metal lateh for construction joint when placing concrete. According to the results, passing ratio of concrete increases with increase of vibrating time. In the case of W/C 50%, when blocking concrete with bar of D10 and D20 which the gap of bar is below 20mm, or metal lateh, passing ratio of concrete is below 10%, so blocking performance is favorable. In the case of W/B 30%, while concree does not flow 65cm, and then, as 5 seconds passes after first vibration, final passing ratio shows about 85-90%. When blocking concrete by bar D10 of the gap 20mm, bar D20 of the gap 10mm and metal lath, it is thought that concrete can be blocked effectively because final passing ratio is below 10%.
Cited by 0 works.