빙해선박 풍우밀문의 결빙방지 성능평가 및 설계기준에 관한 연구
서영교, 정영준 · 2013
For the design guide of a vessel operating in cold region, numerical analysis was carried out to evaluate the weather-tight door whichinstalled the heating cables by using ANSYS 13.0 Transient Thermal. The numerical analysis was performed by considering Advection-Diffusion equation. This study based on the experimental results of ‘A study on Anti-Icing Technique for Weather-Tight Door of Ice-Strengthened Vessels’(Jeong, et al., 2011a) in KIOST. For validation of the numerical analysis results, the cold chamber experimental data measured by the heat sensors in certain location of the weather-tight door was used. The external environmental temperature which varies from 5℃ to -55℃ was considered in numerical analysis. Also three different heating cables which have the heat capacity of 33 W/m, 45 W/m and 66 W/m were adapted for the design parameters to be the most efficient and guidelines for anti-icing design of the weather tight door.
Cited by 2 works.
Authors
References
- A Study on Anti-Icing Technique for Ballast Water of Icebreaking Vessels Operating in Ice-Covered Water
- A Study on the Anti-Icing Performance Evaluating and Design Guide by Heating Coil for Upper Deck of Icebreaking Vessels
- A Study on Anti-Icing Technique for Weather-Tight Door of Ice-Strengthened Vessels