조립토다짐말뚝의 거동특성 평가 및 간편설계기법의 제시

장원호, 황정순, 윤지연 et al. · 한국지반환경공학회 학술발표회논문집 · 2004

Granular compaction pile method is a reinforcement method of soft ground with columns of coarse granular material such as crushed stone and gravel. However, it has been impossible that the reasonable consideration about the changing effect of raft size or loading area and the determination of failure mode in the design procedure. In general, granular compaction pile method induces the effect of soft ground improvement by installing as group piles. The group effects such as the replacement effect and confining pressures due to expansion of the adjacent piles are usually neglected to calculating the ultimate pile capacities in group. A series of laboratory model tests with various conditions and numerical analyses using FLAC_3D are conducted and the main design parameters of the ultimate pile capacity are analyzed in this study. From the research results, it is found that as the installing distance decreases the ultimate pile capacity of group piles increase and the dominant failure mode is bulging failure. A so, the length of granular pile could not be affected to the ultimate pile capacity. On the basis of the results, the simple design method for calculating the ultimate pile capacity is proposed in this study.

Cited by 0 works.

Authors